Is your TP-LINK TL-WR844N router not working correctly? You may experience issues such as connection loss, slow response, or inconsistent performance. Restart/Reboot also not solving. Before going for any other solution, you should reset the TP-LINK TL-WR844N 300 Mbps Multi-Mode Wi-Fi Router to avoid such problems.
You can also reset the password if you forgot the previous password or misconfigured the router. The wrong configuration will make the router unable to use. For default password resetting, there are plenty of ways to try.
How to Reset/Factory Defaults of TP-LINK TL-WR844N 300 Mbps Multi-Mode Wi-Fi Router Using Reset Button?
Follow our below simple step-by-step guidelines to reset the default password.
Step 1: First, find the reset button and press it for 10 seconds before starting the process. When you reset the TP-LINK TL-WR844N router, its default password is also reset. But make sure while you press the reset button, its LED lights should blink.
Step 2: Wait until the TP-LINK TL-WR844N router restarts, once its default password has reset.
Default IP, Username and password for TP-LINK TL-WR844N Router
Those are the default IP, username, and password to access the router panel
How to reset the TP-LINK TL-WR844N 300 Mbps Multi-Mode Wi-Fi Router’s default password by using a web-based page setup?
Step 1: Get access to the web-based setup page for the TP-LINK TL-WR844N 300 Mbps Multi-Mode Wi-Fi Router using default IP and your set username and password
Step 2: Then click on the “Administration” and next click on “Factory defaults”
Step 3: Next to that, tap on the “Restore factory defaults” button in the Factory defaults menu.
Step 4: Once you have reset the TP-LINK TL-WR844N router to default settings, then reconfigure it according to internet connection services.
While resetting and configuring, make sure power LED lights should keep blinking for a couple of moments.
How to reset TP-LINK TL-WR844N 300 Mbps Multi-Mode Wi-Fi Router by 30-30-30 reset method?
You have tried both options above, but you cannot reset the TP-LINK TL-WR844N router to the default password. No worry, the 30-30-30 reset method may help you to reset the default password.
Step 1: Turn on the TP-LINK TL-WR844N router and press the “reset button” for 30 seconds.
Step 2: After 30 seconds, unplug the router from the switch but keep the “reset button” pressed. Do not spare the reset button for 30 seconds more even if the TP-LINK TL-WR844N router is off.
Step 3: Keep button press and turn on the router; while starting, keep button press for 30 seconds more.
Step 4: After 30 seconds, free the reset button, you will see the password has been reset. It is an authentic way that will work for any brand and model of router.
How to change the TP-LINK TL-WR844N router password?
You may need more security to keep your TP-LINK TL-WR844N 300 Mbps Multi-Mode Wi-Fi Router safe from unauthorized access. A default password is easy to guess. So for security, you should change the default password. Follow below simple steps below to change your TP-LINK TL-WR844N router password.
Step 1: Get access to TP-LINK TL-WR844N router web-based setup page for password changing.
Step 2: Now click on the “Administration” tab on the web-based setup page
Step 3: Here, in the management section, you will see “Router password” and “Re-Enter to confirm” options. Enter the password in the first tab and then enter the same password in the confirmation tab.
Step 4: Once you enter a password, click on “Save” to save a new password.
How to change the TP-LINK TL-WR844N router Default IP address?
Step 1: Log in to your web interface
Step 2:From Web interface go to Advanced > Network > LAN > Change as preferred in IP Address field > Save changes.
How to Reboot TP-Link TL-WR844N ?
You can use the power switch to turn it off and after 5 min turns it on. Else Unplugging your TP-Link TL-WR844N 300 Mbps Multi-Mode Wi-Fi Router every 3 months can fix internet connection problems, improve slow moving connections and resolve wireless issues altogether. Rebooting a modem is an effective way to stay proactive (Never reset, always reboot unless you need for certain conditions).
How do I find my default tp-link TL-WR844N WiFi password?
When you first turn on your router and set up the router you need to have access to the router. You will find the default SSID and password in the label under the router.
Your TP-LINK TL-WR844N 300 Mbps Multi-Mode Wi-Fi Router may often show problems such as slow connectivity or connection loss. If rebooting or restarting the modem doesn’t help. Then nothing to worry about, you can easily remove the issue by resetting it to its default state, make sure you know the settings of your internet provider to set the router with their configuration.
We have provided three easy ways to reset the default password. Once you have reset the default password, you can also change it for security purposes.